1. POSITION : Sr. Engineer /Tech lead /Principal Engineer-Electronics
QUALIFICATION : BE / B. Tech/ME /M. Tech –Electronics
EXPERIENCE : 3 to 14 years
JOB CODE : ELECTRONICS DESIGN
JOB DESCRIPTION:
- BE/B.Tech (ME/M.Tech degree is preferred) in Electronics
engineering or equivalent with 3 to 14 years of experience in the
design, development and qualification.
- Must understand the complete product development lifecycle
- Experience in Mixed signal, high speed electronics systems design and development.
- Experience with communication protocols such as ARINC-429, ARINC-717, CAN.VHDL experience is a plus
- Experience with design and analysis of Analog, digital, power circuits, sensor interfaces, FPGAs.
- Experience in LCD Displays, CCD based camera systems, Video processing systems, High performance servers development
- Experience in requirements capture and validation, schematic capture, board bring-up and troubleshooting.
- Experience with hardware/firmware/software integration.
- Understanding of configuration management, requirements traceability (DOORS) and related processes.
- Knowledge of DO-254, DO-160, HALT, HASS tests Experience with qualification testing.
- Strong technical team leadership and mentoring skills. Ability to coordinate multi-disciplined team.
- Experience in making presentations and communicating with management/customers.
- Strong troubleshooting and testing background. Ability to solve complex electronic and HW/SW integration issues.
|
2. POSITION : Sr. Engineer / Lead Engineer-Product Support
QUALIFICATION : B.E/B. Tech/ M.E/M. Tech –E&C /CS
EXPERIENCE : 4 to 10 years
JOB CODE : Product support
JOB DESCRIPTION:
- Candidate should possess a working knowledge of integrating
software applications in a Windows environment for use in the Avionics
industry.
- Experience with aircraft wiring and power systems, including
installation and troubleshooting and experience with Airline
operation, avionics is a plus.
- Experience integrating, deploy, and troubleshooting Windows applications for Windows XP/7/8
- Experience deploying Windows User Interfaces (including implementing human machine interface standards and guidelines)
- Embedded, and/or MS Windows 7 / Windows 7 Embedded. Windows 8 and Windows Server 2008 experience a plus
- Understanding of Design Assurance Levels within DO-178B avionics software development standard a plus
- Knowledge about deploying and integrating applications that utilize a touchscreen interface
- USB, RS-422/485, ARINC-429, 802.11x Wi-Fi, and TCP/IP, and
FTP protocols for transmittal of avionics data over various
communication links. The Cellular 3G/4G protocol knowledge a plus.
- Familiarity with applicable FAA, EASA, ARINC, and RTCA
standards relating to EFBs, Avionics development, and STC certification
- Basic understanding of software and hardware development
life cycle: requirements, design, code, qualification, integration, and
testing
- Remote Access capabilities (VNC, Remote Desktop, Remote Frame Buffering, etc.)
- FAA/EASA software certification and audit experience a plus
- Real-Time Operating System experience a plus
- Excellent verbal and written communication skills are
required along with well-developed competencies in Action Orientation,
Customer Focus, Problem Solving, and Planning.
|
3. POSITION : Senior Engineer-Electrical
QUALIFICATION : B.E/B. Tech/ M.E/M. Tech –E&C /E&E
EXPERIENCE : 4 to 6 years
JOB CODE : ELECTRICAL DESIGN –Battery charger
JOB DESCRIPTION:
- Experience in design and development of electric DC/AC
motors, speed control of motors, Wiper systems, Washer pumps,
wiring/Harness design, Analog electronics and FPGA design.
- Experience in using sensors (Hall Effect sensor, position sensor), EMI/EMC filters in the motor/pump designs.
- Experience in understanding mechanical parts &
interfaces of wiper system (Links, Blades, Arms, flexible tubes).
Understanding and developing CAD drawings.
- Experience in using washer pumps, reservoir and tubing for automobile/aircraft applications.
- Strong troubleshooting and testing background. Ability to
solve complex motor, drive electronics, software and hardware
integration issues.
- Experience in qualification and testing as per DO-160 is a plus
|
4. POSITION : Sr. Engineer
QUALIFICATION : B.E/B. Tech/ M.E/M. Tech –E&C
EXPERIENCE : 4 to 6 years
JOB CODE : Reliability
JOB DESCRIPTION:
- Responsible for Reliability, Maintainability and safety
aspects on a design / development programs and related support
activities on programs
- Primary work will be reliability prediction, Failure Mode
and Effect Analysis (FMEA) and safety assessment of Electronic system
of Aircraft Components
- Needs to understanding electronic schematics and able to analyze schematics and compute component stress levels independently
- Work independently and accountable for the deliverables
assigned. Need to communicate with SBU counterparts in US directly and
complete the task independently.
- Good understanding on standards like MIL-HDBK-217, RIAC 217Plus and SAE standards
- Tool Experience: Experience in Relex
|
5. POSITION : Engineer/Senior Engineer/Technical Lead -Software
QUALIFICATION : B.E/B.Tech – Electrical / Electronics
EXPERIENCE : 2 -8 years
JOB CODE : Software Testing –DO 178B
JOB DESCRIPTION:
- BE in Electronics /Computer Science with 2 to 8 years of
experience in requirement based testing per DO-178B level A
guidelines.
- Possess good understanding of SDLC, has exposure to NI Labview
- Experience in using Engineering design tools Cadence tools, Pspice, Saber, Hyperlynx, VHDL, Matlab
- Developing automated test scripts using “Test Stand”, a
scripting tool developed by National Instruments, in order to verify
the high level functionality of software being developed.
- Must be familiar with high-level verification and
validation concepts as pertaining to software engineering. Experience
with DO-178 V&V concepts is preferred.
- Experience with LabVIEW2012 is preferred
- Experience with scripting methodologies and pitfalls is preferred (computer resource constraints, timing)
- At least two year of experience with TestStand 2012 is preferred.
- Knowledge on Microchip MPLAB (minimal high level use)
- Writing Test plans, custom defined test scripts for the
Test Plans. Test execution, Problem analysis, debugging & report
generation.
- The Qualification engineer will ensure that the Test equipment hardware, Software is built as per the defined requirements.
- To be able to work collaboratively with cross functional
teams like Hardware Design, Test equipment Design, Software Design
& with other members of the project team in order to meet the
overall project objectives.
|
6. POSITION : Engineer/Sr. Engineer-Software Development
QUALIFICATION : B.E/B. Tech –Electronics & Communications
EXPERIENCE : 2 to 6 years
JOB CODE : Software Development –DO 178B
JOB DESCRIPTION:
- Candidate must have atleast 2 to 6 years of experience in developing and testing avionics software per DO-178B.
- Experience in implementing architectures and applications
utilizing a RTOS, including strong understanding of RTOS concepts
including: Tasking and Threading models and priorities; Rate Monotonic
Analysis; Time and Space partitioning; data synchronization, etc. (DEOS
experience is preferred).
- Good understanding on Software Development Life Cycle
- Understanding of DO-178B/C process and guidelines.
- Develop software using C, C++, in RTOS environment.
- Experience in Perl, Python scripting languages.
- Experience in any assembly language is a plus.
- Strong in Web Services and XML.
- Understand Embedded Protocols and Hardware.
- Good experience in USB, SPI, I2C, RS-232/422/485, ARINC-429,
802.11x Wi-Fi, Cellular 3G/4G, TCP/IP, FTP and Bluetooth 2.1/4.0
protocols for transmittal of avionics data over various communication
links.
- Identify and support in automating the processes and project artifacts generation.
- Effectively work on Software Configuration Management tools like PVCS, SVN and Requirements Management tools like DOORS.
|
No comments:
Post a Comment
www.anoorul.com