Walk in @ UTC Aerospace Systems

Walk in

Venue:

Walk in @ UTC Aerospace Systems
Site -1, # 14/1, 15/1,
Maruthi Industrial estate –Phase 2
Whitefield Road, Near Hoodi circle.
Bangalore -48.

1. POSITION : Sr. Engineer /Tech lead /Principal Engineer-Electronics QUALIFICATION                     : BE / B. Tech/ME /M. Tech –Electronics EXPERIENCE                          : 3 to 14 years JOB CODE                              : ELECTRONICS DESIGN JOB DESCRIPTION: BE/B.Tech (ME/M.Tech degree is preferred) in Electronics engineering or equivalent with 3 to 14 years of experience in the design, development and qualification. Must understand the complete product development lifecycle  Experience in Mixed signal, high speed electronics systems design and development.  Experience with communication protocols such as ARINC-429, ARINC-717, CAN.VHDL experience is a plus  Experience with design and analysis of Analog, digital, power circuits, sensor interfaces, FPGAs.  Experience in LCD Displays, CCD based camera systems, Video processing systems, High performance servers development  Experience in requirements capture and validation, schematic capture, board bring-up and troubleshooting.  Experience with hardware/firmware/software integration.  Understanding of configuration management, requirements traceability (DOORS) and related processes. Knowledge of DO-254, DO-160, HALT, HASS tests Experience with qualification testing. Strong technical team leadership and mentoring skills. Ability to coordinate multi-disciplined team.  Experience in making presentations and communicating with management/customers.  Strong troubleshooting and testing background. Ability to solve complex electronic and HW/SW integration issues. Apply now	2. POSITION : Sr. Engineer / Lead Engineer-Product Support QUALIFICATION                        : B.E/B. Tech/ M.E/M. Tech –E&C /CS EXPERIENCE                             : 4 to 10 years JOB CODE                                 : Product support JOB DESCRIPTION: Candidate should possess a working knowledge of integrating software applications in a Windows environment for use in the Avionics industry. Experience with aircraft wiring and power systems, including installation and troubleshooting and experience with Airline operation, avionics is a plus.  Experience integrating, deploy, and troubleshooting Windows applications for Windows XP/7/8  Experience deploying Windows User Interfaces (including implementing human machine interface standards and guidelines)  Embedded, and/or MS Windows 7 / Windows 7 Embedded. Windows 8 and Windows Server 2008 experience a plus Understanding of Design Assurance Levels within DO-178B avionics software development standard a plus  Knowledge about deploying and integrating applications that utilize a touchscreen interface  USB, RS-422/485, ARINC-429, 802.11x Wi-Fi, and TCP/IP, and FTP protocols for transmittal of avionics data over various communication links. The Cellular 3G/4G protocol knowledge a plus.  Familiarity with applicable FAA, EASA, ARINC, and RTCA standards relating to EFBs, Avionics development, and STC certification  Basic understanding of software and hardware development life cycle: requirements, design, code, qualification, integration, and testing  Remote Access capabilities (VNC, Remote Desktop, Remote Frame Buffering, etc.)  FAA/EASA software certification and audit experience a plus  Real-Time Operating System experience a plus Excellent verbal and written communication skills are required along with well-developed competencies in Action Orientation, Customer Focus, Problem Solving, and Planning. Apply now
3. POSITION : Senior Engineer-Electrical QUALIFICATION                       : B.E/B. Tech/ M.E/M. Tech –E&C /E&E EXPERIENCE                            : 4 to 6 years JOB CODE                                : ELECTRICAL DESIGN –Battery charger JOB DESCRIPTION: Experience in design and development of electric DC/AC motors, speed control of motors, Wiper systems, Washer pumps, wiring/Harness design, Analog electronics and FPGA design. Experience in using sensors (Hall Effect sensor, position sensor), EMI/EMC filters in the motor/pump designs.  Experience in understanding mechanical parts & interfaces of wiper system (Links, Blades, Arms, flexible tubes). Understanding and developing CAD drawings.  Experience in using washer pumps, reservoir and tubing for automobile/aircraft applications. Strong troubleshooting and testing background. Ability to solve complex motor, drive electronics, software and hardware integration issues. Experience in qualification and testing as per DO-160 is a plus Apply now	4. POSITION : Sr. Engineer QUALIFICATION             : B.E/B. Tech/ M.E/M. Tech –E&C EXPERIENCE                  : 4 to 6 years JOB CODE                      : Reliability JOB DESCRIPTION: Responsible for Reliability, Maintainability and safety aspects on a design / development programs and related support activities on programs Primary work will be reliability prediction, Failure Mode and Effect Analysis (FMEA) and safety assessment of Electronic system of Aircraft Components Needs to understanding electronic schematics and able to analyze schematics and compute component stress levels independently Work independently and accountable for the deliverables assigned. Need to communicate with SBU counterparts in US directly and complete the task independently.  Good understanding on standards like MIL-HDBK-217, RIAC 217Plus and SAE standards Tool Experience: Experience in Relex Apply now
5. POSITION : Engineer/Senior Engineer/Technical Lead -Software QUALIFICATION             : B.E/B.Tech – Electrical / Electronics EXPERIENCE                  : 2 -8 years JOB CODE                      : Software Testing –DO 178B JOB DESCRIPTION: BE in Electronics /Computer Science with 2 to 8 years of experience in requirement based testing per DO-178B level A guidelines. Possess good understanding of SDLC, has exposure to NI Labview Experience in using Engineering design tools Cadence tools, Pspice, Saber, Hyperlynx, VHDL, Matlab Developing automated test scripts using “Test Stand”, a scripting tool developed by National Instruments, in order to verify the high level functionality of software being developed. Must be familiar with high-level verification and validation concepts as pertaining to software engineering. Experience with DO-178 V&V concepts is preferred. Experience with LabVIEW2012 is preferred Experience with scripting methodologies and pitfalls is preferred (computer resource constraints, timing) At least two year of experience with TestStand 2012 is preferred. Knowledge on Microchip MPLAB (minimal high level use) Writing Test plans, custom defined test scripts for the Test Plans. Test execution, Problem analysis, debugging & report generation. The Qualification engineer will ensure that the Test equipment hardware, Software is built as per the defined requirements. To be able to work collaboratively with cross functional teams like Hardware Design, Test equipment Design, Software Design & with other members of the project team in order to meet the overall project objectives. Apply now	6. POSITION : Engineer/Sr. Engineer-Software Development QUALIFICATION                      : B.E/B. Tech –Electronics & Communications EXPERIENCE                           : 2 to 6 years JOB CODE                                : Software Development –DO 178B JOB DESCRIPTION: Candidate must have atleast 2 to 6 years of experience in developing and testing avionics software per DO-178B.  Experience in implementing architectures and applications utilizing a RTOS, including strong understanding of RTOS concepts including: Tasking and Threading models and priorities; Rate Monotonic Analysis; Time and Space partitioning; data synchronization, etc. (DEOS experience is preferred). Good understanding on Software Development Life Cycle Understanding of DO-178B/C process and guidelines. Develop software using C, C++, in RTOS environment.  Experience in Perl, Python scripting languages.  Experience in any assembly language is a plus.  Strong in Web Services and XML. Understand Embedded Protocols and Hardware. Good experience in USB, SPI, I2C, RS-232/422/485, ARINC-429, 802.11x Wi-Fi, Cellular 3G/4G, TCP/IP, FTP and Bluetooth 2.1/4.0 protocols for transmittal of avionics data over various communication links.  Identify and support in automating the processes and project artifacts generation.  Effectively work on Software Configuration Management tools like PVCS, SVN and Requirements Management tools like DOORS. Apply now